Cable SATA conector macho/conector macho DeLOCK 82825 0,5 m amarillo

This SATA cable by Delock conforms to the SATA III standard and supports data transfer rates up to 6 Gb/s. It is a 0.5 m male-to-male cable with yellow insulation, designed for internal connections between SATA devices such as HDDs, SSDs and controller cards. The cable provides reliable mechanical retention through metal clips on the connectors and is backwards compatible with earlier SATA revisions (operating at the respective lower speeds when used with older devices).

Advantages

The Delock 82825 cable offers a compact 0.5 m length for tidy internal routing, visible yellow insulation for easy identification, and secure snap-in metal clips for stable connections. It supports the full 6 Gb/s SATA III bandwidth while maintaining compatibility with previous SATA versions.

Suitable for

• Connecting internal HDDs and SSDs to motherboards
• Linking SATA controller cards to storage drives
• Replacing or routing existing internal SATA connections in desktop PCs

Key specifications

• Standard: SATA III (6 Gb/s)
• Connector: SATA male to SATA male
• Cable length: 0.5 m
• Colour: Yellow
• Retention: Metal clip on connectors
• Compatibility: Backwards compatible with SATA I/II (speeds limited to device capability)

How to use

Connect one SATA male connector to the SATA port on the motherboard or controller card and the other connector to the SATA port on the drive. The cable is intended for internal use; when connected to a HDD the connector orientation will route the cable to the left side. Ensure connectors are fully seated until the metal clips engage to provide a secure connection. Power must be supplied separately via the PSU SATA power connector.

Recommendations

For optimal airflow and cable management inside the case, use the 0.5 m length to minimize excess slack and avoid routing the cable across fans or heat-generating components. If you require longer runs between components, choose a longer cable to prevent tension on connectors.