Cable SATA DeLOCK 84997 0,5 m

The DeLOCK 84997 SATA cable is a 0.5 m internal SATA III cable with 7-pin connectors on both ends, designed to connect SATA devices such as hard disk drives, controller cards or flash storage to a motherboard or other SATA interfaces. It supports the SATA III standard with data transfer rates up to 6 Gb/s while remaining backwards compatible with earlier SATA versions.

Advantages

The cable supports up to 6 Gb/s transfer speed and is backwards compatible with previous SATA standards. Its 0.5 m length is suitable for compact PC cases and helps maintain an organized internal layout. Metal locking clips on the connectors provide a secure and reliable connection, and the cable is built for durability with standardized 7-pin SATA connectors on both ends.

Suitable for

• Connecting internal HDDs and SSDs to motherboards
• Connecting SATA controller cards
• Connecting internal flash storage devices
• Use in small or compact PC cases where a short cable is needed

Key specifications

• Cable type: SATA III
• Cable length: 0.5 m
• Connectors: SATA 7-pin to SATA 7-pin
• Data transfer rate: up to 6 Gb/s (backwards compatible)
• Product colour: Black, Blue

How to use

Align the 7-pin SATA connector with the corresponding SATA port on your drive or motherboard and gently push until the metal clip clicks to secure the connection. When connecting to a drive positioned vertically, the cable will lead upwards from the connector. Ensure both ends are fully seated before powering the system. If replacing an existing cable, power down the system and disconnect power first.

Recommendations

For optimal reliability, avoid tight bends and excessive tension on the cable. Use the 0.5 m length for short internal runs; for longer distances choose a longer SATA cable. Ensure connectors are free of dust before insertion and handle the metal clips gently to prevent damage.