Disipador de aire AEROCOOL Rave 3 FRGB 120 mm negro blanco — 3 heatpipes, ARGB, rodamiento hidráulico, 1800 rpm

The Aerocool Rave 3 FRGB is a 120 mm CPU air cooler with a hydraulic-bearing FRGB fan and Heat Core Touch Technology (HCTT). It uses three thermal heat pipes and upgraded aluminum fins with a black thermal coating to increase heat dissipation area and improve cooling efficiency. The cooler is supplied with a PWM 4-pin connector and is compatible with a wide range of modern CPU sockets.

Advantages

The included 120 mm FRGB fan has translucent blades to showcase RGB lighting while maintaining effective airflow and quiet operation thanks to the hydraulic bearing. HCTT provides a flat contact surface between heat pipes and the CPU to reduce thermal transfer losses. High-pressure fan performance and high-efficiency aluminum fins, enhanced by a black thermal coating, accelerate heat removal from the fins.

Suitable for

• Cooling desktop CPUs in standard ATX, Micro-ATX, and Mini-ITX builds
• Systems requiring visible RGB lighting in the cooler area
• Moderate gaming and productivity builds up to the cooler's TDP

Key specifications

• Type: Air cooler
• Fan diameter: 120 mm
• Bearing: Hydraulic
• Heat pipes: 3 (HCTT, flat contact surface)
• Fins: Upgraded aluminum with black thermal coating
• Connector: PWM 4-pin
• Approx. TDP: 130 W
• Colour: Black / White
• Socket compatibility: LGA 1700, LGA 1200/115X/1155/1151/1150/775, AM5, AM4, AM3+/AM3/AM2+/AM2, FM2/FM1
• EAN / MPN: 4711099472222 / AEROPGSRAVE3-FRGB-4P

How to use

Mount the cooler onto the motherboard following the included bracket and mounting instructions for your socket type. Apply a thin, even layer of thermal paste to the CPU heatspreader, align the cooler so the HCTT base sits flat on the CPU, and secure the mounting screws in a cross pattern to ensure even pressure. Connect the fan cable to a motherboard PWM 4-pin header and, if required, connect any FRGB lighting cable to the appropriate header or controller.

Recommendations

Ensure compatibility with your case and RAM clearance before installation; verify socket support and available height. For best results, keep fan and fin surfaces dust-free and monitor fan speed via motherboard BIOS or software. Use within the cooler’s recommended TDP for sustained performance.