Material de impresión 3D Creality 3D 3301010335 poliláctido (PLA) blanco 1 kg

Creality 3D 3301010335 Polylactic acid (PLA) White 1 kg is a white, 1.75 mm diameter PLA filament supplied on a 1 kg spool. Designed for compatibility with Creality 3D printers and other FDM machines that accept 1.75 mm filament, this PLA offers the typical balance of printability, dimensional stability and biodegradability associated with polylactic acid. The spool dimensions and packaging make handling and storage straightforward in a workshop or desktop environment.

Advantages

This white PLA filament provides reliable layer adhesion, low warping and minimal shrinkage, which simplifies first-layer calibration and reduces failed prints. The material prints at relatively low temperatures compared with engineering plastics, lowering thermal stress on the printer and making it suitable for a wide range of nozzle sizes. Its white color offers a neutral base for post-processing such as sanding, painting or dyeing, and the filament’s consistent diameter supports steady extrusion and predictable print results.

Suitable for

• Prototyping and concept models
• Decorative parts, figurines and props
• Educational projects and classroom use
• Functional parts with low mechanical load
• Post-processing workflows such as priming and painting

Key specifications

• Material: Polylactic acid (PLA)
• Color: White
• Filament diameter: 1.75 mm
• Net weight: 1 kg (spool)
• Compatibility: FDM printers that accept 1.75 mm filament, optimized for Creality 3D machines
• Packaging dimensions: 210 mm (width) x 70 mm (depth)

How to use

Load the 1.75 mm filament into the printer according to the machine manufacturer’s instructions. Recommended printing temperatures for PLA typically range from 180 °C to 220 °C; adjust within this range based on nozzle size, print speed and part geometry. Use a heated bed if available, set to around 40–60 °C to improve adhesion, or employ a suitable adhesion aid such as blue tape or glue stick for unheated beds. Allow printed parts to cool before removing them from the build plate to reduce risk of deformation.

Recommendations

Store the spool in a dry environment and, if not used frequently, keep it in a sealed bag with desiccant to preserve filament quality. For best surface finish, print with moderate speeds and fine layer heights; sand and prime the white PLA prior to painting to achieve an even base. Avoid exposing finished PLA parts to prolonged outdoor sunlight or high temperatures, as the material can soften above typical room temperatures.