METZ CONNECT 130B11D21200-E toma de red empotrable RJ45 Cat.6A apantallada, blanco puro 130B11D21200E90

For installations where a standard RJ45 module falls short, the METZ CONNECT 130B11D21200-E delivers verified Cat.6A / Class EA performance in a flush-mounted, single-port design. Its shielded housing and gold-plated contacts ensure 10 Gigabit Ethernet links remain stable even in electrically noisy environments, while the integrated dust protection flap keeps the jack clean when not in use.

Highlights

• Cat.6A (Class EA) performance for 10GBASE-T up to 500 MHz
• Shielded (STP/FTP) construction with phosphor bronze, gold-plated contacts
• Flush-mounted (Unterputz) design, pure white (RAL 9010) finish
• Tool-free LSA termination for solid wires AWG 24/1 to AWG 22/1
• Supports T568A and T568B wiring schemes
• PoE+ (IEEE 802.3at) and PoE++ (IEEE 802.3bt) compatible
• Central plate with integrated dust protection flaps

In daily use

Installers benefit from the compact module depth of approximately 32 mm, allowing it to fit into standard flush-mounted boxes without excessive space. The LSA insulation displacement connectors accept solid conductors from AWG 24/1 to AWG 22/1, and the colour-coded terminal blocks reduce wiring errors. Once terminated, the outlet provides a secure, shielded connection point for high-speed data transmission in office, industrial, or residential settings. The dust flap automatically closes when the patch cord is removed, protecting the contacts from debris and oxidation.

Full specifications

• Product type: RJ45 network outlet / data socket
• Performance category: Cat.6A (Class EA) per ISO/IEC 11801, EN 50173-1
• Shielding: Shielded (STP/FTP)
• Mounting type: Flush-mounted (Unterputz)
• Number of ports: 1
• Colour: Pure white (RAL 9010)
• Module type: E-DAT C6Amod
• Transmission speed: Up to 10 Gigabit Ethernet (10GBASE-T)
• Termination type: LSA (Insulation Displacement Connector)
• Wire gauge support: AWG 24/1 to AWG 22/1 (solid wire)
• Wiring scheme: T568A and T568B compatible
• Housing material: Plastic (PC/ABS)
• Standards compliance: ISO/IEC 11801, EN 50173-1, TIA/EIA-568-C.2
• PoE support: PoE+ (IEEE 802.3at) and PoE++ (IEEE 802.3bt) compatible
• Contact material: Phosphor bronze with gold plating
• Operating temperature: -10°C to +60°C
• Installation depth (module): Approx. 32 mm

Final note

A dependable, future-ready outlet for demanding network infrastructures, combining Cat.6A performance with practical installation features and a clean white aesthetic.