Microconnect HDMVGA1B Adaptador de cable de vídeo 0,15 m HDMI Type-A (estándar) VGA (D-Sub) negro

The Microconnect HDMVGA1B is a compact 0.15 m HDMI Type A (Standard) to VGA (D-Sub) video cable adapter designed to connect HDMI output devices to VGA displays. It supports a maximum resolution of 1920x1080p at 60Hz and does not support audio transfer. The adapter is RoHS certified, lightweight (28 g) and finished in black, making it suitable for portable use in presentations and home setups.

Advantages

This adapter provides a simple, passive conversion from HDMI video signals to VGA monitors, supporting Full HD (1920x1080p@60Hz) video. Its short 0.15 m length and 28 g weight make it easy to carry and install without adding bulk. RoHS certification indicates compliance with environmental safety standards.

Suitable for

• Connecting laptops or media players with HDMI output to VGA projectors
• Using HDMI-equipped devices with older VGA-only monitors
• Short-distance connections in meeting rooms and classrooms

Key specifications

• Connectors: HDMI Type A (Standard) to VGA (D-Sub)
• Resolution: up to 1920x1080p @ 60Hz
• Audio: not supported
• Length: 0.15 m
• Weight: 0.028 kg
• Colour: Black
• Certification: RoHS

How to use

Plug the HDMI Type A connector into the HDMI output of your source device and connect the VGA (D-Sub) end to the VGA input of the display or projector. Ensure both devices are powered on and set the display input to the VGA source. Adjust the output resolution on the source device to 1920x1080p@60Hz or a compatible setting if needed. No audio will be transmitted through this adapter; use a separate audio connection if sound is required.

Recommendations

For best results, keep cable runs short and avoid active signal conversion requirements—this adapter performs passive video conversion and is intended for devices and displays that accept sourced HDMI signals converted to VGA. If your HDMI source requires HDCP or digital-to-analog conversion, verify compatibility before purchase.