Módulo transceptor de fibra óptica BlueOptics 0231A0A8-BO 10000 Mbit/s SFP+ 1310 nm

The BlueOptics 0231A0A8-BO is an SFP+ fiber optic transceiver module engineered for 10 Gbit/s network links. Operating at a 1310 nm wavelength and designed for single-mode fiber with an LC duplex connector, this compact transceiver weighs approximately 20 g and fits standard SFP+ ports that follow MSA guidelines. It supports high-speed Ethernet and other optical transport protocols across typical long-reach single-mode deployments.

Advantages

This BlueOptics SFP+ module delivers a standardized interface (SFP+) for easy hot-plug installation and interoperability with equipment that accepts MSA-compliant transceivers. The 1310 nm transmitter and receiver pair provide stable optical transmission suitable for long-reach single-mode links. Its lightweight, metal housing and silver finish simplify handling and integration into rack-mounted network devices.

Suitable for

• 10 Gbit/s Ethernet uplinks between switches and routers
• Long-reach single-mode fiber connections in campus or metropolitan networks
• Interconnects for storage systems and data center equipment that accept SFP+ transceivers

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Operating wavelength: 1310 nm
• Connector: LC duplex (single-mode fiber)
• Weight: 0.02 kg
• Product colour: Silver

How to use

Insert the transceiver into an available SFP+ slot on a compatible switch, router or network interface and secure it according to the host device instructions. Connect a single-mode fiber cable with LC duplex connectors to the module, observing correct transmit/receive orientation. Configure the host device interfaces as required for 10 Gbit/s operation and the intended network protocol. Remove the dust caps from the fiber connectors and the module before making the connection to avoid contamination.

Recommendations

To maintain signal quality, use single-mode fiber rated for long-reach optical links and keep connector endfaces clean. Verify compatibility with the target hardware and firmware; if necessary, request a test sample to confirm full functionality in your environment.