Módulo transceptor de fibra óptica BlueOptics 1AB390930004-BO 10000 Mbit/s SFP+

The BlueOptics 1AB390930004-BO is a fiber optic transceiver module in an SFP+ form factor designed for 10 Gbit/s applications. Its compact silver housing and lightweight construction (0.02 kg) make it suitable for dense networking environments and blade or rack-mounted equipment. Built to industry standards with CE, FCC and RoHS compliance, the module delivers a maximum data transfer rate of 10000 Mbit/s and an MTBF of 1,000,000 hours, supporting reliable high-speed optical links.

Advantages

This SFP+ transceiver offers a small footprint compatible with equipment supporting SFP+ slots, enabling straightforward upgrades to 10 Gbit/s links without major hardware changes. The low weight and compact dimensions reduce space and power constraints in high-density installations. Compliance with CE, FCC and RoHS ensures regulatory compatibility and environmentally conscious materials, while the high MTBF indicates long operational life and reduced maintenance needs.

Suitable for

• 10 Gbit/s uplinks between switches and routers
• Data center interconnects and server-to-switch links
• High-density switch modules and blade server networking
• Enterprise backbone and campus network aggregation

Key specifications

• Form factor: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Product colour: Silver
• Weight: 0.02 kg
• Mean Time Between Failures (MTBF): 1,000,000 hours
• Compliance: CE, FCC, RoHS

How to use

Install the BlueOptics SFP+ module into a compatible SFP+ slot on network equipment until it clicks into place, then connect the appropriate fiber optic cable to the module's port. Ensure the transceiver type and data rate are supported by the host device and configure port settings on the switch or router as required. When removing the module, follow the equipment manufacturer’s hot-swap or shutdown procedures to avoid signal interruption or hardware damage.

Recommendations

Use certified single-mode or multimode fiber and matching connector types as specified by your network design. Verify link parameters and compatibility with the host device firmware; operate within environmental limits and handle the module by its housing to avoid contamination of optical interfaces.