Módulo transceptor de fibra óptica BlueOptics JL746A-BO 10000m aluminio

The BlueOptics JL746A-BO 10000m Aluminium is an SFP fiber optic transceiver module engineered for singlemode optical links up to 10,000 meters. Housed in an aluminum casing for mechanical protection and thermal stability, this module supports standard SFP interface connectivity with LC duplex fiber connectors and is intended for use in network equipment that accepts SFP modules. It provides bidirectional optical transmission and reception at wavelengths and protocols compatible with 1000BASE-LX singlemode Ethernet applications.

Advantages

The aluminium housing offers robust protection and aids heat dissipation for stable operation in rack-mounted and field-installed equipment. Compliance with common SFP mechanical and optical standards ensures broad compatibility with switches, routers, storage systems and other networking hardware. The module is designed for long-reach singlemode links, reducing the need for intermediate equipment while maintaining low susceptibility to electromagnetic interference. Built-in diagnostic capability (where supported by host hardware) enables remote monitoring of key operating parameters.

Suitable for

Key specifications

How to use

Install the module into an SFP slot on compatible network equipment while the host device is powered down or per the manufacturer's hot-swap procedure. Connect LC duplex singlemode fiber patch cables observing correct transmit/receive pairing. Verify link status on the host device and, if available, read diagnostics through the device management interface to confirm power, temperature and receive levels. Follow standard electrostatic discharge (ESD) precautions during handling and keep protective dust caps on connectors until final connection.

Recommendations

For reliable long-distance links, use singlemode LC duplex patch cables and ensure proper polishing and cleanliness of fiber endfaces. Confirm that the host hardware supports 1000BASE-LX SFP modules and, if remote monitoring is required, that the device supports digital diagnostic monitoring (DDM/DOM). Maintain ambient operating temperatures within the equipment manufacturer's specified range and inspect fiber routes for tight bends or physical damage that could affect optical performance.