Módulo transceptor de fibra óptica BlueOptics PAN-SFP-PLUS-LR 10000 Mbit/s SFP+ 1310 nm

The BlueOptics PAN-SFP-PLUS-LR 10000 Mbit/s SFP+ 1310 nm is a fiber optic transceiver module designed for single-mode fiber links. It supports a maximum data transfer rate of 10 Gbit/s and transmits at a wavelength of 1310 nm, enabling reliable high-speed connectivity for network equipment that accepts SFP+ form-factor modules. The module is intended for use in networking environments where stable optical links and industry-standard SFP+ compatibility are required.

Advantages

This SFP+ transceiver provides a compact form factor compatible with SFP+ ports and supports up to 10000 Mbit/s throughput, making it suitable for 10 Gbit/s network segments. Operating at 1310 nm, the module is optimized for single-mode fiber transmission over medium to long distances. Its standardized interface type ensures interoperability with a wide range of switches, routers and network appliances that accept SFP+ modules.

Suitable for

Key specifications

How to use

Install the BlueOptics PAN-SFP-PLUS-LR into an open SFP+ port on compatible network equipment, ensuring the module is fully seated. Connect the single-mode fiber cable with appropriate connectors to the optical interface and verify that transmit and receive fibers are correctly oriented. After physical installation, confirm link status and negotiate speed on the host device; the module is designed to work with standard SFP+ ports and typical network configurations.

Recommendations

Handle the optical transceiver by its housing and avoid touching the fiber connector endface. Keep protective caps on connectors when not in use and follow ESD precautions during installation. Verify compatibility with the host device's SFP+ port and consult device documentation for module-supported distance ranges at 1310 nm.