Módulo transceptor de fibra óptica BlueOptics SFP10GLR10D-BO SFP+ 10000 m

The BlueOptics SFP10GLR10D-BO is a fiber optic SFP+ transceiver module designed for high-speed single‑mode links up to 10,000 m. Housed in an aluminium casing and weighing 20 g, this SFP+ module implements a 10GBASE‑LR interface with LC duplex connectivity and operates with 1310 nm transmitter and receiver wavelengths. It is built to the MSA SFP+ form factor and supports standard 10 Gbps optical Ethernet and compatible protocols for use in switches, routers, storage systems and other network equipment that accept SFP+ LR modules.

Advantages

The module delivers 10 Gbps data transmission over long distances while remaining compact and lightweight. Its aluminium housing provides mechanical durability and thermal dissipation. Compliance with MSA standards and use of commonly accepted optical components ensure interoperability with a wide range of equipment. The transceiver supports digital diagnostics (DDM/DOM) for monitoring parameters such as supply voltage, laser bias current, laser output power, received power and temperature when the host device provides DDM support.

Suitable for

• Long‑reach 10 Gbps Ethernet links over single‑mode fiber
• Inter‑switch or switch‑to‑router connections in campus and data center networks
• Storage area network uplinks and high‑speed aggregation ports
• Fiber backbones requiring LC duplex connectors and MSA‑compliant SFP+ modules

Key specifications

• Interface type: SFP+ (10GBASE‑LR)
• Wavelength: 1310 nm transmit / 1310 nm receive
• Maximum reach: up to 10,000 m over single‑mode fiber
• Connector: LC Duplex
• Housing material: aluminium
• Weight: 0.02 kg
• Supports digital diagnostics (DDM/DOM) when host supports SFF‑8472

How to use

Insert the SFP10GLR10D-BO transceiver into a compatible SFP+ slot on the host device until the module latches. Connect LC duplex single‑mode patch cords to the module’s transmit and receive fibers, ensuring correct polarity. Configure the host interface for 10 Gbps optical operation according to the device documentation. If the host supports digital diagnostics (DDM/DOM), enable monitoring functions to view real‑time module parameters. Follow the host vendor’s guidance for hot‑swap procedures; typically the module can be inserted or removed while the host is powered on if supported.

Recommendations

Use single‑mode fiber with appropriate LC duplex patch cords and, where necessary, route the fiber through patch panels to maintain optimal link quality. Verify host device compatibility with SFP+ 10GBASE‑LR modules and confirm DDM support if monitoring is required. Avoid bending fibers beyond their minimum bend radius and keep connectors clean to prevent loss and reflectance. For critical links, test the transceiver in your environment prior to deployment.