Módulo transceptor SFP BlueOptics 545044-BO 1250 Mbit/s fibra óptica

The BlueOptics 545044-BO 1250 Mbit/s Fiber optic SFP transceiver module is a compact optical networking component designed for short- to medium-range fiber connections. This SFP form factor module supports a maximum data transfer rate of 1250 Mbit/s and is intended for use in compatible switches, routers and transceivers that accept SFP modules. The module is finished in silver, has a lightweight construction and is compliant with CE, FCC and RoHS standards.

Advantages

The module’s SFP form factor allows hot-pluggable installation in standard SFP ports, enabling flexible upgrades and replacements without powering down equipment. With a rated maximum transfer speed of 1250 Mbit/s, it is suitable for common Gigabit-compatible fiber links and delivers consistent optical connectivity. A mean time between failures (MTBF) of 1,000,000 hours indicates long operational reliability, while the low weight and compact dimensions reduce strain on connector slots and cabling assemblies.

Suitable for

• Enterprise and SMB switches and routers with SFP ports
• Fiber optic uplinks between network equipment
• Replacing or adding SFP transceivers in media converters and optical line cards
• Short- to medium-distance fiber connections in LAN environments

Key specifications

• Interface type: SFP (Small Form-factor Pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Product colour: Silver
• Weight: 0.02 kg
• Compliance: CE, FCC, RoHS
• Mean Time Between Failures (MTBF): 1,000,000 hours

How to use

Prior to installation, ensure the target device supports SFP modules and the required optical parameters. With equipment powered on or off according to the host device guidelines, insert the BlueOptics SFP module into an empty SFP port until it seats securely. Connect the appropriate fiber cable to the module’s optical interface, observing proper connector type and polarity. After physical installation, verify link status in the host device’s management interface and confirm the module is recognized and operating at the expected speed.

Recommendations

Handle the transceiver using ESD-safe procedures and keep protective dust caps in place when the module is not connected. Match fiber type and connector standards to the module’s optical specifications and avoid bending fibers beyond recommended limits to maintain signal integrity. For stable operation, use the module within the environmental and mechanical limits specified by the host device manufacturer.