Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s

Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
52,36 €
The BlueOptics SFP-BXU34-20KM-BC-BO is a single-port SFP transceiver module designed for fiber optic links with a maximum data transfer rate of 1250 Mbit/s. Housed in a metal enclosure with a silver finish and weighing approximately 20 g, this compact module is intended for use in network equipment ... Leer más
Stock 257 Código 1484666 Marca BLUEOPTICS Modelo SFP-BXU34-20KM-BC-BO Garantía 2 años

Envíos y devoluciones

Entrega estimada Martes, Octubre 27
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

The BlueOptics SFP-BXU34-20KM-BC-BO is a single-port SFP transceiver module designed for fiber optic links with a maximum data transfer rate of 1250 Mbit/s. Housed in a metal enclosure with a silver finish and weighing approximately 20 g, this compact module is intended for use in network equipment that supports small form-factor pluggable transceivers. The specified MTBF of 1,000,000 hours indicates reliability suited to installations requiring long-term stable optical connectivity over extended distances.

Advantages

This SFP transceiver offers a standardized SFP interface for straightforward hot-pluggable installation and replacement. The metal housing provides mechanical protection and helps with thermal dissipation during operation. With a compact and lightweight design, it reduces space requirements in switches or routers while maintaining a rated data throughput of 1250 Mbit/s. The long MTBF supports deployments where minimal maintenance and predictable uptime are important.

Suitable for

Key specifications

How to use

Install the module into an SFP-compatible port on a switch, router or media converter while the host device is powered according to the vendor's hot-pluggable guidance. Connect the appropriate fiber optic cable to the module's optical interface, ensuring correct transmitter/receiver orientation and connector type compatibility. Configure the host device's port settings (speed, duplex, and optical parameters if applicable) as required by the network design. Monitor link status indicators on the host device to confirm proper operation after installation.

Recommendations

Handle the optical interfaces carefully: keep protective caps on unused ports, avoid contamination of fiber end faces, and perform inspection and cleaning when necessary. Use this module in equipment that explicitly supports SFP transceivers and in environments within the manufacturer's operating temperature and humidity ranges to ensure reliable performance.

Aspectos destacados
  • Point-to-point fiber links in campus or enterprise networks
  • Fiber uplinks for switches and routers requiring SFP modules
  • Data transmission over longer distances where optical modules are needed
  • Network equipment maintenance and module replacements
  • Interface: SFP (small form-factor pluggable)
  • Maximum data transfer rate: 1250 Mbit/s
  • Housing material: metal
  • Colour: silver
  • Weight: 0.02 kg
  • Mean time between failures (MTBF): 1,000,000 hours
Especificaciones
Cantidad por paquete
1 pc(s)
Color del producto
Silver
Compatibilidad con conexión en caliente
Yes
Compatible con fibra monomodo (SMF)
Yes
Conector de fibra óptica
LC
Diámetros de fibra compatibles (núcleo/revestimiento)
9/125
Distancia máxima de transmisión
20000 m
Estándar de transceptor SFP
BX-U
Longitud de onda de recepción (máx.)
1490 nm
Longitud de onda de transmisión (máx.)
1310 nm
Material de la carcasa
Metal
Peso
0.02 kg
Peso del embalaje
30 g
Temperatura de funcionamiento (T-T)
0 - 70
Tiempo medio entre fallos (MTBF)
1000000 h
Tipo de interfaz
SFP
Tipo de transceptor SFP
Fiber optic
Velocidad máxima de transferencia de datos
1250 Mbit/s
Historial de precios de los últimos 6 meses
Módulo transceptor SFP BlueOptics SFP-BXU34-20KM-BC-BO 1250 Mbit/s
Actual
52,36 €
Mínimo
51,51 €
Máximo
57,76 €
Variación 24 h
+0,65 €   +1%
Semana
+0,54 €   +1%
Mes
-2,74 €   -5%

Productos populares en esta categoría

Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.