Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm

Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
89,80 €
The BlueOptics SFP-GLSD-70-A-BO is a single‑mode fiber SFP transceiver module designed for 1000BASE-ZX and similar gigabit optical links. It supports a maximum data rate of 1250 Mbit/s and operates at a nominal wavelength of 1550 nm. The module comes in a metal housing, weighs approximately 3 g, and... Leer más
Stock 90 Código 1484949 Marca BLUEOPTICS Modelo SFP-GLSD-70-A-BO Garantía 2 años

Envíos y devoluciones

Entrega estimada Jueves, Octubre 22
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

The BlueOptics SFP-GLSD-70-A-BO is a single‑mode fiber SFP transceiver module designed for 1000BASE-ZX and similar gigabit optical links. It supports a maximum data rate of 1250 Mbit/s and operates at a nominal wavelength of 1550 nm. The module comes in a metal housing, weighs approximately 3 g, and uses a standard SFP interface with an LC duplex optical connector. It requires a 3.3 V supply and is intended for use in networking equipment that accepts MSA‑compliant SFP transceivers.

Advantages

The module follows MSA SFP form‑factor standards, which helps ensure interoperability with a wide range of switches, routers and storage devices that support compatible 1000BASE‑ZX transceivers. Its metal housing provides mechanical stability and thermal dissipation while the lightweight design keeps module weight minimal. Operating at 1550 nm and rated for up to 1250 Mbit/s, it is suitable for long‑reach single‑mode fiber links when used with appropriate patch cords and fiber infrastructure.

Suitable for

Key specifications

How to use

Install the transceiver into an SFP slot of a compatible network device while the device is powered according to the vendor guidance or hot‑plug as supported. Connect LC duplex single‑mode patch cords to the transmitter and receiver ports, ensuring correct TX/RX orientation and proper fiber polishing/cleaning. Configure the host device network settings to enable the link and verify operational parameters such as link speed and diagnostics through the device management interface. Confirm that the receiving endpoint and any intermediate equipment support 1550 nm single‑mode optics and the expected link distance.

Recommendations

Use high‑quality single‑mode LC duplex patch cords and clean connector endfaces before mating. Verify compatibility with the host hardware and enable Digital Diagnostic Monitoring (DDM/DOM) on platforms that support it to monitor supply voltage, optical power and temperature for proactive maintenance.

Aspectos destacados
  • Long‑reach single‑mode fiber Ethernet links (1000BASE‑ZX)
  • Interconnection of switches, routers and optical aggregators
  • Fibre Channel over Ethernet and SDH/SONET applications up to 1.25 Gbit/s
  • Replacement of MSA‑compatible SFP transceivers in compatible hardware
  • Interface type: SFP (MSA form factor)
  • Maximum data transfer rate: 1250 Mbit/s
  • Wavelength: 1550 nm
  • Connector: LC duplex (optical)
  • Supply voltage: 3.3 V
  • Housing: metal
  • Weight: approx. 0.003 kg
  • Fiber type: single‑mode
Especificaciones
Cantidad por paquete
1 pc(s)
Color del producto
Silver
Conector de fibra óptica
SFP
Distancia máxima de transmisión
80000 m
Estándar de transceptor SFP
ZX
Longitud de onda
1550 nm
Longitud de onda de recepción (máx.)
1550 nm
Longitud de onda de transmisión (máx.)
1550 nm
Material de la carcasa
Metal
Peso
0.003 kg
Peso del embalaje
2 g
Sistema dúplex
Full
Tecnología de cableado Ethernet de fibra
1000BASE
Temperatura de almacenamiento (T-T)
-40 - 85
Temperatura de funcionamiento (T-T)
0 - 70
Temperatura máxima de funcionamiento
70 °C
Temperatura mínima de funcionamiento
0 °C
Tensión de entrada
3.3
Tipo de interfaz
SFP
Tipo de transceptor SFP
Fiber optic
Velocidad máxima de transferencia de datos
1250 Mbit/s
Historial de precios de los últimos 6 meses
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Actual
89,80 €
Mínimo
88,04 €
Máximo
91,46 €
Variación 24 h
+0,77 €   +1%
Semana
+0,58 €   +1%
Mes
+0,98 €   +1%

Productos populares en esta categoría

Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.