Objetivo de larga distancia Ubiquiti AI Theta

The Ubiquiti AI Theta Long-Distance Lens is an indoor lens accessory designed for connection to an AI Theta Hub. It integrates with Ubiquiti AI Theta systems to extend viewing range and works with an 8 MP CMOS sensor configuration. The lens is compact and lightweight, suitable for installations where a longer focal reach is required while maintaining a small physical footprint.

Advantages

The long-distance lens provides a 44.4° diagonal viewing angle and is built for wired connection to the AI Theta Hub. It operates at 5 V with a maximum power consumption of 2.5 W, and its small diameter of 2.28 cm and 43.5 mm depth make it easy to install in tight indoor spaces. Weighing 15 g, it adds minimal load to the host camera system.

Suitable for

• Indoor surveillance where extended focal distance is needed
• AI Theta Hub installations requiring a compact long-range lens
• Environments with limited mounting space

Key specifications

• Sensor: 8 MP CMOS (lens designed for AI Theta system)
• Diagonal viewing angle: 44.4°
• Power: 5 V, max 2.5 W
• Connection: wired (for AI Theta Hub)
• Dimensions: 2.28 cm diameter × 43.5 mm depth
• Weight: 15 g
• Brand: UBIQUITI; MPN: UVC-AI-THETA-LENS-LD; EAN: 0810084692370

How to use

Install the lens onto a compatible AI Theta camera or module following the manufacturer’s mounting instructions. Connect the assembly to the AI Theta Hub via the wired interface, provide a 5 V power supply, and ensure the hub and camera firmware are up to date. After physical installation, configure the camera settings in the AI Theta management interface to optimise focus and field of view for the intended monitoring area.

Recommendations

Use the lens indoors only and pair it with the official AI Theta Hub and compatible camera modules. Verify power supply limits (5 V, max 2.5 W) and confirm mounting clearances before finalising installation.