D516GB 5200-36 Viper Venom PAT (PVV516G52C36)

PATRIOT Viper Venom 16 GB (1x16 GB) DDR5-5200 288-pin DIMM ECC memory module is a single-module DDR5 system memory designed for PC and server use. This 16 GB DIMM operates at 5200 MT/s with CAS latency 36 and supports on-die ECC for single-bit error correction and multi-bit error detection. The module accepts multiple memory voltages (1.1–1.45 V) and is available with a black or white heatspreader finish. Engineered with premium aluminum components and hand-tested at production, the Viper Venom DDR5 targets systems that require DDR5 performance combined with error-correction capability and efficient power and thermal management.

Advantages

The Viper Venom DDR5 module offers higher data integrity through on-die ECC and integrated high-quality PMIC for stable operation at DDR5 speeds. Multiple supported voltages and compatibility with Intel XMP 3.0 and AMD EXPO profiles simplify system tuning and overclocking. Built with premium-grade aluminum and subjected to 100% hand testing, the module provides consistent manufacturing quality. Low-power management and thermal optimizations reduce operating temperatures and power draw compared with earlier memory generations.

Suitable for

• System memory upgrades for desktop PCs that require DDR5 performance
• Server or workstation builds where ECC and data integrity are important
• Users who want compatibility with Intel XMP 3.0 or AMD EXPO for profile-based tuning
• Builds that require a single 16 GB DIMM slot upgrade

Key specifications

• Capacity: 16 GB (single module)
• Memory type: DDR5
• Data rate: 5200 MT/s
• CAS latency: 36
• Form factor: 288-pin DIMM
• Supported voltages: 1.1 V, 1.2 V, 1.3 V, 1.35 V, 1.4 V, 1.45 V
• Error correction: On-die ECC (single-bit correction, multi-bit detection)
• Thermal solution: Aluminum heatspreader (black or white finish)
• Power management: Integrated PMIC for efficient voltage regulation

How to use

Install the DIMM into a compatible 288-pin DDR5 memory slot on a motherboard that supports DDR5 modules. Before installation, power down the system and disconnect from mains. Align the notch on the module with the slot key and press evenly until the retention clips engage. After installation, enable the desired memory profile (XMP 3.0 or AMD EXPO) in the system BIOS/UEFI to apply optimized timings and voltages if supported by the motherboard. For server or workstation systems, verify ECC support and BIOS configuration for on-die ECC functionality.

Recommendations

Use matched memory modules and follow motherboard vendor guidance when populating multiple DIMM slots. Ensure adequate airflow over the module to benefit from the heatspreader and PMIC thermal behavior. When overclocking, increase voltages within motherboard and module specifications and monitor system stability and temperatures. Consult the motherboard manual for supported memory voltage ranges and profile selection.