DIMM 32 GB DDR4-3200 (2x 16 GB) kit dual, memoria rojo/negro, PVE2432G320C8K, Viper Elite II, INTEL XMP

The Patriot Memory Viper Elite DDR4 32GB 3200MHz (kit of 2 x 16GB) is a dual-channel memory solution for desktop PCs and compatible workstations. Built on DDR4 technology, the modules run at an effective frequency of 3200 MHz with CAS latency 18 and operate at 1.35 V. The 288-pin DIMM form factor and compact heatsink with black and red styling provide reliable thermal performance and a visual match for many performance-oriented builds. This memory kit is intended to improve system responsiveness, application loading and multitasking capability compared with lower-frequency modules.

Advantages

The Viper Elite DDR4 modules offer higher effective bandwidth at 3200 MHz and stable operation at 1.35 V, enabling smoother multitasking and faster data exchange between CPU and memory. The dual-module kit supports dual-channel configurations to increase throughput. A low-profile heat spreader in red and black assists passive cooling without interfering with most CPU coolers or tight memory slots. Compatibility with modern motherboards supporting DDR4 ensures straightforward installation and system upgrades.

Suitable for

• Gaming desktop systems that require 32 GB of memory for modern titles and background applications
• Content creation workstations handling photo and video editing, rendering and multitasking
• General-purpose and productivity PCs that need improved responsiveness with many open applications or browser tabs
• System upgrades where 288-pin DIMM DDR4 memory is supported

Key specifications

• Total capacity: 32 GB (2 × 16 GB modules)
• Memory type: DDR4
• Effective frequency: 3200 MHz
• CAS latency: 18
• Operating voltage: 1.35 V
• Form factor: 288-pin DIMM
• Module colour: black and red with low-profile heat spreader
• Weight (approx.): 0.072 kg

How to use

Power down the computer and disconnect from the mains before installing the memory modules. Open the system case and locate the appropriate DIMM slots on the motherboard, consulting the motherboard manual for recommended dual-channel slot placement. Align the notch on the module with the slot key and press evenly until the module clicks into place and the retention clips engage. After installation, reconnect power and enter the system BIOS/UEFI to confirm the modules are detected and running at the correct frequency; enable XMP/DOCP profile if available to achieve the advertised 3200 MHz setting. Save changes and boot the operating system to verify stable operation.

Recommendations

For optimal performance, install the modules in the motherboard slots specified for dual-channel operation and enable the appropriate memory profile in BIOS/UEFI. Ensure your CPU and motherboard officially support DDR4 3200 MHz or higher; otherwise the modules will operate at the highest mutually supported frequency. When combining with existing memory, use modules of the same capacity, type and timing to avoid compatibility issues.