Phoenix 3076041 UTI 6-PE/L/N Borne de instalación en carril

Electricians wiring distribution boards often need a single compact terminal that handles protective earth, neutral, and line conductors without taking up extra DIN rail space. The Phoenix 3076041 UTI 6-PE/L/N solves this by combining three isolated potentials in one 3-level block. Its screw connection accepts solid conductors up to 10 mm² and stranded up to 6 mm², with a rated current of 41 A and voltage of 500 V for the L/N circuits. The PE level is integrated for grounding, and the gray body with yellow-green PE and blue N markings makes identification instant. Mount it on standard NS 35/7.5 or NS 35/15 rails, strip 10 mm of insulation, and tighten the M4 screws—done.

Key specifications

• Type: Multi-level installation terminal block
• Levels: 3 (PE, N, L)
• Connection: Screw
• Nominal cross section: 6 mm²
• Rated voltage (L/N): 500 V
• Rated current (L/N): 41 A
• Conductor cross section solid: 0.2 – 10 mm²
• Conductor cross section stranded: 0.2 – 6 mm²
• AWG range: 24 – 8
• Mounting: DIN rail NS 35/7.5, NS 35/15
• Insulating material: Polyamide (PA)
• Colour: Gray body, yellow-green PE, blue N
• Stripping length: 10 mm
• Screw thread: M4
• Operating temperature: -60 °C to 105 °C
• Flammability rating: UL 94 V0
• Pollution degree: 3
• Overvoltage category: III
• Standards: IEC 60947-7-1, IEC 60947-7-2, UL, CSA, VDE

Why choose it

This terminal block saves rail space by stacking PE, N, and L in one unit, reducing wiring time and potential errors. The colour-coded levels and clear markings speed up installation and maintenance. Its polyamide housing withstands harsh industrial temperatures from -60 °C to 105 °C and meets strict flammability and safety standards, ensuring long-term reliability in control cabinets and distribution panels.

Ideal use cases

• Building installation distribution boards
• Industrial control panels
• Machine wiring with combined PE/N/L requirements
• Retrofit projects where DIN rail space is limited

Good to know

The terminal is approved for use with solid and stranded conductors, including fine-stranded wires with appropriate ferrules. Always observe the specified stripping length of 10 mm and torque settings for M4 screws to ensure secure connections. The block is compatible with standard NS 35 DIN rails and can be combined with other Phoenix terminal blocks for a complete solution.