Sistema de alimentación ininterrumpida (SAI) APC BE650G2-FR Standby (Offline) 0,65 kVA 400 W

The APC BE650G2-FR is a compact standby uninterruptible power supply (UPS) that delivers 0.65 kVA (400 W) of output power in a black enclosure. Designed for desktop and small-office equipment, it provides temporary battery power during outages, surge protection for connected devices and data lines, and features user-replaceable, hot-swappable batteries to reduce downtime. The unit includes a 1.83 m power cable, complies with RoHS and is certified by CE and EAC.

Advantages

Adjustable voltage-transfer points extend battery usefulness by widening the input voltage window or tightening output regulation. Audible alarms and a disconnected battery notification inform users of changing power conditions and battery availability. Automatic self-tests detect batteries that need replacement early. The Building Wiring Fault Indicator warns of hazardous wall-circuit wiring. Cold-start capability provides temporary battery power when utility power is absent. Transformer-block spaced outlets accommodate devices with large plugs without blocking other receptacles. USB connectivity enables communication with a PC for additional power management functions. Safety-agency approvals ensure the UPS meets recognized safety standards.

Suitable for

• Desktop PCs and workstations
• Home office equipment (routers, modems, VoIP devices)
• External hard drives and small NAS units
• Point-of-sale terminals and small business electronics

Key specifications

• Model: APC BE650G2-FR
• Output power capacity: 0.65 kVA (650 VA)
• Output power: 400 W
• Colour: Black
• Cable length: 1.83 m
• Battery life: up to 5 years (typical)
• Battery recharge time: 16 hours
• Certifications: CE, EAC; RoHS compliant
• Features: surge protection, dataline protection, USB connectivity, cold-start capable, hot-swappable/user-replaceable batteries
• Weight: 4 kg

How to use

Place the UPS on a stable, ventilated surface near the equipment to be protected and the utility outlet. Connect devices to the battery-backed and surge-protected outlets, and plug the UPS into the mains using the supplied 1.83 m cable. Use the USB connection to link the UPS to a computer if you require monitoring or automatic shutdown features (install any manufacturer software if needed). Periodically run the automatic self-test or perform manual tests according to the user manual to verify battery condition. Replace batteries following the instructions—hot-swappable, user-replaceable batteries allow replacement without interrupting power to connected equipment when done correctly.

Recommendations

Install the UPS in a dry, cool area with adequate ventilation. Avoid blocking vents and keep the unit away from heat sources. Regularly check the Building Wiring Fault Indicator and run battery self-tests; replace batteries when the unit signals diminished capacity or after the specified service life to maintain reliable backup power.