Transceptor de fibra óptica BlueOptics SFP-503A1G1310 1250 Mbit/s 1310 nm

The BlueOptics SFP-503A1G1310 1250 Mbit/s 1310 nm is a compact fiber optic transceiver module designed for single-port SFP interfaces. It supports a maximum data transfer rate of 1250 Mbit/s and operates on a 1310 nm wavelength, providing point-to-point fiber connectivity for network devices that accept SFP form-factor modules. The module is intended for use in networking environments where reliable serial optical links are required for switches, routers, media converters and similar equipment.

Advantages

The transceiver offers a standardized SFP interface for hot-pluggable installation and straightforward integration into existing networking hardware. Operating at 1310 nm, it is suitable for medium-distance single-mode fiber links and provides predictable optical behavior for planning and deployment. With a 1250 Mbit/s maximum rate, the module supports common Gigabit Ethernet and imaging/serial protocols that rely on SFP connectivity.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP-503A1G1310 into an empty SFP slot on the network device while the device is powered on or as permitted by the device manufacturer, as the SFP form factor typically supports hot-plugging. Ensure compatible single-mode fiber cabling is terminated with appropriate connectors (commonly LC) and that the fiber link is correctly aligned to the remote transceiver. Configure the network device interface as required for the desired protocol and data rate. Verify link status and diagnostics via the host device management interface after installation.

Recommendations

Use single-mode fiber for best performance at 1310 nm and follow vendor guidelines for insertion and handling to avoid contamination of optical connectors. Confirm compatibility with the host device's SFP port and firmware to ensure stable operation and monitor link parameters through the network device's management tools.