Módulo transceptor SFP BlueOptics SFP-10G-LRM-CO 10000 Mbit/s SFP+ 1310 nm

The BlueOptics SFP-10G-LRM-CO is a fiber optic SFP+ transceiver module supporting data rates up to 10,000 Mbit/s. Operating at a wavelength of 1310 nm, this compact module is intended for short to medium-reach multimode fiber links where 10 Gigabit Ethernet connectivity is required. The module’s SFP+ interface and silver housing make it compatible with a wide range of switches and routers that accept SFP+ form-factor transceivers.

Advantages

The module offers a standardized SFP+ interface for straightforward hot-pluggable installation and replacement. Its 1310 nm wavelength and specification for 10 Gbit/s transmission provide predictable performance for data center and enterprise backbone links. At approximately 20 grams and a compact SFP+ form factor, the transceiver minimizes space and weight impact in high-density networking environments.

Suitable for

• 10 Gigabit Ethernet short to medium-reach multimode fiber connections
• Upgrading switches or routers with SFP+ ports
• Data center uplinks and aggregation links
• Enterprise backbone and campus network segments

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Operating wavelength: 1310 nm
• Form factor: SFP+ transceiver module
• Typical weight: 0.02 kg
• Housing colour: silver

How to use

Insert the BlueOptics SFP-10G-LRM-CO into an available SFP+ port on a compatible switch or router while the host device is powered on or off according to the host vendor’s hot-plug guidelines. Connect the appropriate multimode fiber cable with matching connectors to the transceiver’s optical interface. Verify link status and speed through the host device management interface and ensure fiber type and link length fall within the transceiver’s supported reach.

Recommendations

Use certified multimode fiber and maintain clean optical connectors to ensure reliable 10 Gbit/s performance. Confirm compatibility with the host device’s SFP+ port and firmware acceptance list if required by the vendor. Avoid mechanical stress on the fiber and module; store in an anti-static environment when not installed.