Soporte de pared Schwaiger TILT 5 100 pulgadas Plata 75 kg 60–100" VESA 200x200–900x600

The Schwaiger TILT 5 wall mount is designed for flat-panel screens from 60 to 100 inches, supporting a maximum load of 75 kg. Its tilt adjustment ranges from -10° to +5°, and the mount positions the screen at a minimum distance of 8.5 cm from the wall. The silver finish provides a neutral look suitable for homes, offices, and public spaces. VESA compatibility spans from 200 x 200 mm up to 900 x 600 mm, accommodating a wide range of TV and monitor models.

Advantages

The tilt mechanism allows controlled downward and slight upward viewing angle adjustments to reduce glare and improve sightlines. Broad VESA compatibility and a high load rating make the mount suitable for larger screens while maintaining stable support. The relatively shallow profile keeps the display close to the wall, saving space and providing a neat appearance. The silver colour integrates with modern interior designs without drawing attention.

Suitable for

• Mounting large TVs in living rooms and home theaters
• Installing displays in meeting rooms and conference areas
• Wall-mounting digital signage in retail or public spaces
• Securing screens in educational environments and lecture halls

Key specifications

• Supported screen size: 60–100 inches
• Maximum weight capacity: 75 kg
• VESA compatibility: 200 x 200 mm up to 900 x 600 mm
• Tilt range: -10° to +5°
• Minimum distance to wall: 8.5 cm
• Colour: Silver
• Number of displays supported: 1

How to use

Choose a suitable, load-bearing wall and mark mounting points according to the mount’s template. Attach the wall plate securely using appropriate anchors or bolts for the wall material, then fasten the mounting arms to the screen using screws that match the screen’s VESA holes. With assistance, lift the display and hook it onto the wall plate, then secure locking hardware if supplied. Adjust the tilt within the -10° to +5° range to achieve the desired viewing angle and verify all fastenings are tight before leaving the installation unattended.

Recommendations

Verify that the combined weight of the display and any accessories does not exceed 75 kg. Use suitable wall fixings for the substrate (concrete, brick, timber studs, etc.) and follow local building codes. When in doubt, consult a professional installer. Periodically check screws and fittings for tightness, and avoid forcing the tilt mechanism beyond its specified range.