SPT PUMPEN 750 W/S - Bomba sumergible para aguas sucias con interruptor de flotador 0,75 kW | 230 V 50

Flooded cellars, construction pits, or ponds with murky water demand a pump that won’t choke on debris. The SPT PUMPEN SPX750S00 dirty water submersible pump tackles exactly that—moving up to 12,000 litres per hour while handling particles up to 25 mm. Its integrated float switch automates the job: the pump starts when water rises and stops when it drops, so you don’t have to stand watch. With a robust 750 W motor and a 10-metre delivery head, it clears water fast from basements, sumps, and excavations.

Who is it for

Homeowners dealing with occasional flooding, builders managing site water, farmers draining ponds or slurry, and facility managers needing reliable sump drainage. If your water contains sand, sludge, or small solids, this pump is built for it.

Main features

• Powerful 750 W motor for high flow rates up to 12,000 L/h
• Integrated float switch for automatic on/off operation
• Handles dirty water with particles up to 25 mm
• Maximum delivery head of 10 metres for deep drainage
• Submersible design with IPX8 protection for continuous underwater use
• Robust housing suitable for harsh environments
• Standard 230 V / 50 Hz power for easy connection

Specifications

• Power: 750 W
• Voltage: 230 V
• Frequency: 50 Hz
• Pump type: Submersible motor pump
• Water type: Dirty water
• Switch: Integrated float switch
• Maximum delivery height: 10 m
• Maximum flow rate: 12,000 L/h
• Maximum particle size: 25 mm
• Protection class: IPX8
• Housing material: Robust plastic / stainless steel
• Maximum liquid temperature: 35 °C
• Cable length: 10 m (typical)

Tips

Place the pump on a solid surface in the water to avoid sucking in large debris. Check the float switch moves freely before each use. After pumping dirty water, rinse the pump with clean water to extend its life. Store in a frost-free place.