Cable SATA DeLOCK 60159 0,3 m multicolor

This Delock SATA cable adapts a single free 15-pin SATA power connector from the power supply to supply power for two SATA devices. The cable is 0.3 m long, follows the SATA I specification and features a multicolour design. Metal clips on the receptacles and the clearance on the plug ensure a secure, audible click when connected.

Advantages

The adapter allows powering two SATA devices from one PSU SATA 15-pin power output without additional converters. Its short 0.3 m length is suitable for compact builds and tight internal cable routing. Metal locking clips help maintain a reliable connection under normal operating conditions.

Suitable for

• Powering two SATA hard drives or SSDs from one SATA 15-pin power connector
• Small form factor PC builds with limited cable length
• Internal cable routing where a short power lead is preferred

Key specifications

• Cable type: SATA I
• Cable length: 0.3 m
• Connector: SATA 15-pin
• Product colour: Multicolour
• Brand: DELOCK, MPN: 60159, EAN: 4043619601592

How to use

Disconnect power from the system before installation. Plug the 15-pin SATA power connector from the power supply into the cable's plug until the connector clicks. Connect the two SATA receptacles to the power inputs of your SATA devices, ensuring the metal clips engage. Restore power and verify that connected drives receive power and are recognized by the system.

Recommendations

Use this adapter only for powering SATA devices; avoid routing strain on connectors and do not use the cable where a longer or shielded cable is required. Ensure the power supply can handle the combined power draw of both devices.